Tankless Water Heater Repair Lexington KY

Tankless Water Heater Repair Lexington KY Troubleshooting

Normally, many of the issues that might occur with a tankless water heater, causing it to need a repair are external factors. Right here are a few of them:Tankless Water Heater Repair Lexington KY

The venting is not proper. The most common mistake is using regular B-vent, which can rapidly ruin the heat exchanger due to acidic condensation.
Check the gas supply line. In some cases the supply line is undersized and was just connected to the existing line size. The size specified in the setup manual requires to be used.
The gas pressure is not correct. The working pressure should be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, depending on the design.
The wrong type of gas that is being used – natural gas or liquid propane. It is not possible to make use of the non-specified type.
Water flow or temperature level fluctuation concerns. There are numerous things we will inspect to ensure they are working appropriately, like cleaning or changing the input filter, examining the check valve, inspecting the seals in the faucets and looking to see if there is a cross flow someplace that needs to be fixed.
Hard Water Problems: In locations where the water is very hard, de-scaling will be required periodically.
Environmental concerns. The heaters need to be installed in a clean location with access to combustion air that is devoid of dust, lint, grease, or chemicals.

Back to Water Heater Repair Lexington KY